Product ID:ROYCO 49;GREASE
MSDS Date:01/01/1987
FSC:9150
NIIN:00-823-8047
MSDS Number: BFRDR

ROYAL LUBRICANTS COMPANY,INC.

Emergency Phone: 201-887-3100

Cage: 07950

ROYAL LUBRICANTS COMPANY INC.

518 EAST HANOVER, NJ 07936 US

Telephone: 973-887-7411/7410

Cage: 07950

PETROLEUM HYDROCARBONS (TAKE TLV AS OIL MIST=5MG/CUM)

CLAY

ACGIH TLV: NOT SPECIFIED

MOLYBDENUM DISULFIDE

CAS: 1317-33-5

RTECS: QA4697000

OSHA PEL 10 MG/M3 TDUST (MO)

ACGIH TLV: 10 MG/M3 (MO); 8990

Effects of Overexposure:NONE NOTED;MAY IRRITATE EYES AND SKIN ON
PROLONGED CONTACT.

First Aid:INHALE:REMOVE TO FRESH AIR, GIVE CPR/O*2 IF
NEED;EYES/SKIN:FLUSH W LG AMTS H*2O FOR 15 MIN;INGEST:RINSE MOUTH;
GET MEDICAL ATTENTION FOR EYES, BREATHING DIFFICULTY, OR OTHER
SYMPTOMS OF OVEREXPOSURE.

Extinguishing Media:CO*2,DRY CHEMICAL FOAM
Fire Fighting Procedures:DO NOT USE WATER JETS;USE NIOSH APPROVED SCBA.
Unusual Fire/Explosion Hazard:NONE NOTED

Spill Release Procedures:USE PROPER PERSONAL PROTECTION;CLEAN-UP WITH
METAL SCRAPERS AND RAGS.SPREAD DRY SAND OR MINERAL ABSORBENT OVER
REMAINING GREASE. RECOVER FOR PROPER DISPOSAL.

Handling and Storage Precautions:STORE IN COOL DRY AND WELL VENTILATED
AREA;KEEP AWAY FROM HEAT AND OPEN FLAMES;KEEP CONTAINER CLOSED WHEN
NOT IN USE.
Other Precautions:AVOID CONTACT WITH SKIN AND EYES;DO NOT BREATHE OIL
MIST IFANY.WASH HANDS THOROUGHLY WITH SOAP AND WARM WATER BEFORE
HANDLING FOOD OR SMOKING.

Respiratory Protection:NO SPECIAL REQMNTS UNDER ORDINARY
CONDITIONS/ADEQUATE VENT.
Ventilation:MECH(GEN)OR LOCAL EXHAUST THAT PROVIDES ADEQUATE
VENTILATION
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:FULL WORK CLOTHING TO PREVENT REPEATED OR
PROLONGED CONTACT.
Supplemental Safety and Health
MSDS UNDATED

HCC:V6
Solubility in Water:NEGLIGIBLE
Appearance and Odor:GREASE FOR GENERAL PURPOSE.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Stability Condition to Avoid:HEAT AND OPEN FLAMES.
Hazardous Decomposition Products:NONE NOTED

Waste Disposal Methods:DISPOSE OF COLLECTED MATERIAL IN ACCORDANCE WITH
LOCAL,STATE AND FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.